360-icon download left-arrow left-doublearrow nav-dot pdf-icon rss-icon search-icon spot-icon subnavi-icon close-icon info-icon

My partner – overcomes any challenge.

Unbeatably manoeuvrable, unbeatably safe

The high-quality front axle design combines manoeuvrability and robustness with safe handling. It is therefore easy to change over to the next row at the end of the row. 58° steering angle, wasp-waist design, front axle suspension with anti-roll control, and the high load capacity of the axles form the basis for maximum performance of man and machine.

Power on all wheels

In addition to the permanent 4WD, the Fendt 200 V/F/P Vario also has automated 4WD. The automated 4WD controls 4WD engagement fully automatically, dependent on steering angle and speed. This ensures complete manoeuvrability at all times, reduces tyre wear, and takes the strain off the operator.

High-quality multi-disc differential locks

Through the use of high-quality 100% locking differentials at the front and rear (V and F), the locks can be fully engaged and disengaged under load. The locks release immediately when disengaged. The Fendt 200 P Vario has the tried and tested Locomatic self-locking differential in the front axle. 4WD and differential lock remain active when the engine comes to a stop and when restarted – increasing your safety on slopes.

Exceptional ride and operating comfort.


The intelligent combination of three systems guarantees maximum ride and operating comfort: the self-levelling front axle suspension with anti-roll control, the cab on silent bearings and the active shock load stabilising. The suspension does a great job of minimising jolts and unevenness on the road and in the fields. Selflevelling provides a consistently high level of ride comfort even with high payloads.

The smallest turning radius is just 3.2 m, depending on the tyres. You will notice this immediately at the end of the row, where you can switch to the row after the next without having to change direction.

The streamlined wasp-waist design allows a wide steering angle up to 58° and outstanding manoeuvrability in combination with the VarioActive steering system.

The suspension does a great job of minimising jolts and unevenness on the road and in the fields. Selflevelling

provides a consistently high level of ride comfort even with high payloads.






My partner – a fusion of many talents.

The Fendt 200 V/F/P Vario hydraulic system, well-designed down to the last detail, offers sufficient control valves, separately adjustable flow rates, a prioritisation function, adjustable responsiveness, and much more besides. The benefit of two usable hydraulic circuits lies in the reduction of idle power thanks to the requirement- based oil distribution.

You have everything under control with the buttons on the comfortable multi-function joystick: Rear power lift, control valves, cruise control and speed control. The right crossgate lever controls the 1st and 2nd valves. The buttons on the crossgate lever control 2 electrical functions.

The crossgate lever permits sensitive control of the first and second control valves. The third to fifth control valves are controlled by linear modules, conveniently located in front of the armrest.

The armrest folds up to expose a rotary control that can be used to change the button assignment for the multi-function joystick. The oil flow volume of the individual valves can be very easily set with the rotary controls.

Powerful hydraulics

Fendt 200 V/F/P Varios are fitted with a load-sensing hydraulic system. Modern axial piston pumps deliver the exact quantity of hydraulic oil required – up to 71 l/min and with flow summation 104 l/min. A maximum of 25 litres of hydraulic oil is available to mounted and trailed implements. The oil supplies for the transmission and hydraulics are separate. This allows bio oils to be used in the hydraulics without a problem. A less complex hydraulic option with a tandem pump is also available.

Mosaic

Four double-acting valves on the right-hand and two valves on the left-hand side, together with return flow and cross connection, permit optimal supply of high-level hydraulic combinations. You can use up to 3 mounts at the same time for time and cost-saving combinations.

  • Mosaic

    In the Profi package, the Fendt 200 V/F/P Vario has four electric double-acting auxiliary valves as standard specification and can be optionally equipped with up to six auxiliary spool valves. The auxiliary spool valves are controlled with the crossgate lever, linear modules and the multi-function joystick.

  • Mosaic

    Four double-acting valves on the right-hand and two valves on the left-hand side, together with return flow and cross connection, permit optimal supply of high-level hydraulic combinations. You can use up to 3 mounts at the same time for time and cost-saving combinations.

  • Mosaic

    The hydraulic hoses are always neat and clutter-free thanks to fasteners at both sides.

  • Mosaic

    The sensitivity of the hydraulic control units can be easily adjusted in the display.

  • Mosaic

    Use the priority function to select the preferred hydraulic consumer.

My partner – simply irreplaceable.

The front linkage on the Fendt 200 V/F Vario has a lift capacity of 2,380 daN. The lower links fold up easily. If you detach the lower links completely, an implement attachment plate is available for compact mounting of front implements. The front linkage on the Fendt 200 P Vario has a lift capacity of 2,540 daN. The lower links can also be folded. All variants can be conveniently operated directly via the multi-function joystick or the crossgate lever. Even without the front linkage, a mounting plate is fitted between tractor and implement as a secure, stable interface.

The mounting plates integrated in the front linkage always provide a stable and secure base for heavy front-mounted implements.

The front hydraulics lower links can be folded compactly in just a few steps.

2,540 daN lift capacity is available on the front linkage in the P variant.

Without the front linkage, there is an option to fasten additional ballast directly onto the frame.

Inter-axle mounting for efficient use of flexible implement combinations.

Clear view of your implements. Many well-designed details for ergonomic operation.

Front- and Inter-Axle Mounting

The exhaust variant at the top and implement mounting plates in the inter-axle section are a great option for mounting inter-axle implements, e.g. a weeder. The combination of hydraulic functions with the mounts allows cost-effective implement combinations for efficient operation.

My partner – always unique.

The Fendt 200 V Vario has a lift capacity of 2,775 daN, the F variant has 2,417 daN and the P variant 3,143 daN. The external controls on the two rear mudguards facilitate the mounting of implements. On the Fendt 200 V/F Vario the rear power lift acts as a swinging power lift, and in the hydraulic version, the lateral and tilt adjustment is controlled via the user-friendly keypad. On steep slopes in particular, the Fendt swinging power lift has proven its worth, as it is linked in front of the rear axle and provides reliable traction, especially on a slope.

The PTO selector is an electrohydraulic control with 3-speed preselection. The standard PTO automatic mode automatically engages and disengages the PTO, depending on the height of the rear power lift. If engaged externally, the automatic engine speed increase can be used. The adjustable PTO engagement with its modified and highly-precise starting protects the PTO implements. You benefit from low maintenance costs and a longer life for your implements. A ground PTO is available for special applications.

Two hydraulic cylinders tilt the 3-point linkage in both directions.
The rear implements can even be guided precisely on slopes.

The lower links can be adjusted to the left and right using the two hydraulic cylinders, and guide the rear implement precisely along the row. Free floating is possible in the floating position.

You can control the lateral and tilt adjustment of the swinging power lift, as well as swing and lock, with the push of a button. The tilt adjustment display always show you the setting to suit your application.

The rear power lift can be easily adjusted in the EHR control panel. The button can be transferred to the multi-function joystick with the automatic function.

The swinging power lift on the V/F variants is linked in front of the rear axle. The width-adjustable lower links and hooks allow simple adjustment to match any implement.

A fully-fledged Cat2 power lift is available in the P-variant. All connections are clearly arranged and easily accessible on all variants.