360-icon download left-arrow left-doublearrow nav-dot pdf-icon rss-icon search-icon spot-icon subnavi-icon close-icon info-icon

Perfectly equipped.

The ideal line when grubbing, pass-to-pass accuracy when sowing, the perfect cut when mowing – with the Fendt 700 Vario, your work nears perfection and you will be highly satisfied with the results. The numerous interfaces and automated functions offer you maximum ver- satility for mounting implements. Powerful hydraulics facilitate and expand the areas of application for maximum efficiency and the best productivity.

A robust cast half frame, which enables a permissible gross weight of 14 tonnes, carries the load on the Fendt 700 Vario. With a high payload of 6,020 kg, the compact high-horsepower tractor has plenty of reserves for heavy implements.

Powerful hydraulics

With a delivery capacity of 193 litres per minute, the load-sensing pump on the Fendt 700 Vario provides high volume capacity for the hydraulics. These pumps for the Profi and ProfiPlus variants have an easy time with the most demanding implement operations. Additional pumps with a delivery capacity of 152 l/min and 109 l/min (Power) perform strongly with all implements. These pump capacities permit the engine speed to be kept low, which saves fuel effectively, even during demanding operations.

Weight lifter in best form

Thanks to its stable design, the Fendt 700 Vario has a lift capacity of 10360 daN and can manage the heaviest loads. With this easy-use front hitch with load relief control, you can transfer some of the implement weight to the front axle. Fine-tune the degree of load relief with a special double-acting front power lift valve. This ensures both the safe steering of the tractor and that the front-mounted implement only applies the pressure it needs for the work it is doing.

The load relief control for the front linkage is a particular advantage when operating a snow plough or a front mower in grassland operations, since implement guidance can be quickly adjusted to uneven surfaces.

The linkage is set via the Varioterminal and actuated with the power lift control module, multi-function joystick or the external controls on the rear mudguard or in the front.

Interfaces at the front

  • Top link
  • Two double-acting control valve
  • Unpressurised return front
  • 7-pin socket
  • Front PTO (1000 rpm)
  • shut-off valve
  • Lower link catch hook
  • Fold-up lower links
  • Electrohydraulic front linkage incl. shock load stabilising

Interfaces at the rear

  • ISOBUS connection
  • Hydraulic top link
  • Five double-acting control valves
  • Unpressurised return flow
  • Air brake
  • Pressure and control line power beyond
  • Hydraulic trailer brake
  • 7-pin socket
  • Lower link hook end
  • ABS socket
  • Rear PTO (540 / 540E /1000 / 1000E)
  • Hitch
  • Bottom hitch
  • Steering axle automatic
Mosaic

Power beyond pressure and control line for efficient drive and control of the implement.

  • Mosaic

    Power beyond pressure and control line for efficient drive and control of the implement.

  • Mosaic

    The hydraulic connections on the Fendt 700 Vario can always be coupled under pressure (CUP). The double-sided CUP (couple-under-pressure) couplings make mounting and removing the implements much easier.

  • Mosaic

    Rear PTO with 540, 540E, 1000 and 1000E rpm speeds The external PTO actuation at the rear is especially convenient.

  • Mosaic

    The self-closing valve flaps offer secure protection against contamination through dirt or water.

  • Mosaic

    ISOBUS socket for connecting implement control.

  • Mosaic

    Using the double-sided fender controls, you can actuate the PTO shaft in the tractor boot, the rear hitch and a control unit of your choice.

When tractor and front loader work together perfectly, that is Fendt Cargo.

Optimal operating interface concept

It's never been so easy to use – controlling the Fendt Cargo is child's play, with the controls perfectly integrated into the right armrest and in the Varioterminal. While you use your right hand to control the crossgate lever and, with it, the front loader, the left hand is free to steer and reverse. You control the speed with your foot. The CargoProfi represents the absolute pinnacle in front loader operation.

Smart functions of the CargoProfi

The new Fendt CargoProfi* is the consistent further development of the tractor and front loader unit. New measuring and tilt sensor systems as well as a job computer enable new functions. These are a weighing function for individual and total weight, for example, for monitoring when loading salt or gravel, as well as the memo function for saving the positions of the arm and attachment or also a shaking function. The settings are easy to adjust and view in the Varioterminal.

*available for front loader models 5X/85 and 5X/90

Unobstructed view

An unobstructed view through glazed areas and high manoeuvrability make the Fendt 700 Vario ideal for front loader work.

Fast and easy loading? Lies at hand.

The controls for the front loader are optimally integrated in the overall operating interface on the right armrest and in the Varioterminal: you control the front loader with your right hand on the crossgate lever, your left hand is free for steering and reversing. You control the speed with your foot. With the reverser, you can change driving direction quickly and easily, without wear. The high hydraulic capacity of the Fendt 700 Vario ensures swift loading and unloading: The load-sensing pump delivers up to 193 l/min

Membrane keypad for attachment lock and activation of damping

Standard multi-coupler for fast mounting and removing.

Ideal steering and damping system

Less steering and more fun at work with the front loader thanks to the VarioActive steering. With this superimposed steering system, you can already achieve a full steering angle with just one turn of the steering wheel. The advantages are clear – especially in tight farmyards, but also at the headlands. Add to that the active damping on the front loader: Gas pressure reservoirs absorb vibrations and shock loads so they are not transmitte to the tractor body.

Fendt front loader Cargo

Smart functions of the CargoProfi

The new Fendt CargoProfi* is the consistent further development of the tractor and front loader unit. New measuring and tilt sensor systems as well as a job computer enable new functions. These are a weighing function for individual and total weight, for example, for monitoring when loading salt or gravel, as well as the memo function for saving the positions of the arm and attachment or also a shaking function. The settings are easy to adjust and view in the Varioterminal.
*available for the front loader models 5X/85 and 5X/90

Broad line of Fendt attachments, optimally adapted to the Fendt Cargo
Optional 3rd and 4th circuit, also with multi-coupler
Valve assembly integrated in cross beam
Cargo Lock with semi-automatic lock
Parking supports mounted compactly on arm

On the Fendt CargoProfi, for example, the tipping angle can be limited when loading very high trailers. The Memo function is especially practical for repeating sequences, for example, the horizontal lower position can be targeted automatically. The weighing function permits monitoring of the weight of the load.

Fendt front loader CargoProfi

Display for crossgate lever and weighing system: individual and total weight and limiting of the workin range for the arm and attachment.

Fendt front loader CargoProfi