360-icon download left-arrow left-doublearrow nav-dot pdf-icon rss-icon search-icon spot-icon subnavi-icon close-icon info-icon

Double knotted and securely packed.

The tried-and-tested double knotter in the Fendt square balers guarantees reliable tying, even under high compression pressure.

Everything is clean

A new integral traverse-impeller fan, which is standard on every Fendt square baler, optimises the results of the double knotter. A constant air stream blows any dirt that has entered the knotting area out again. The traverse-impeller fan, which is driven by the baler hydraulic system, can be easily folded up to insert the twine.

Always the same length

A spur gear, which is positioned in the middle of the bale chamber, constantly measures the bale length – precisely and independent of the baling conditions. Its synchronous movement with the baler permits highly accurate measurement, so the bale length is always uniform.

Mosaic

Secure tying

The double knotter system in the Fendt square balers was developed in Hesston and has been optimised continually over 30 years and is one of the best knotter systems in the industry today. Each bale is tied securely with six knotters on a 120 cm wide channel and four knotters on a 80 cm wide channel. Two knots are produced during each tying procedure. Through the double knotter system, the twine holder and the needle are only subject to loads during the tying process. This guarantees less wear and higher operational security.

  • Mosaic

    Secure tying

    The double knotter system in the Fendt square balers was developed in Hesston and has been optimised continually over 30 years and is one of the best knotter systems in the industry today. Each bale is tied securely with six knotters on a 120 cm wide channel and four knotters on a 80 cm wide channel. Two knots are produced during each tying procedure. Through the double knotter system, the twine holder and the needle are only subject to loads during the tying process. This guarantees less wear and higher operational security.

  • Mosaic

    Durable and protected

    The bearings in the knotter area are sealed and protected. They have a long lifetime and low maintenance requirement. The knotter is lubricated through the centralised lubrication system. The duration and intervals for the lubrication can be adjusted to the prevailing conditions using the Varioterminal in the tractor.

  • Mosaic

    Optimal access

    The knotters that can be lifted up individually ensures optimum access for maintenance and servicing.

  • Mosaic

    Cross-flow fan

    The standard specification cross-flow fan maintains a constant flow of air over the entire knotter area, which thoroughly clears all debris from the knotter area.

  • Mosaic

    Uniform twine feed

    The twine is guided through the knotter brakes for uniform twine feed to the knotter.

Nothing is left to chance

A safety rod connected to the piston drive reliably protects the pins in the event of a broken shear pin.

Maximum twine supply

Mosaic

Smart and good-looking

The Fendt square baler is not only good-looking, it is also very functional. Large side panels that open provide an optimum overview of the fill level of the twine box. A twine storage capacity of 30 rolls ensures there is enough material for long work days. The balls of twine are stored at a 30° angle, which means the twine cannot slip or catch.

  • Mosaic

    Smart and good-looking

    The Fendt square baler is not only good-looking, it is also very functional. Large side panels that open provide an optimum overview of the fill level of the twine box. A twine storage capacity of 30 rolls ensures there is enough material for long work days. The balls of twine are stored at a 30° angle, which means the twine cannot slip or catch.

  • Mosaic

    Optimal overview with maximum twine volume

    With 30 balls of twine on board, it is possible to continue baling on long days without stops. If the twine runs out, it can be refilled and knotted without a problem, even in the dark, thanks to the sophisticated lighting concept.

  • Mosaic

    "Easy-Fill" – guarantees easy filling

    With the unique “Easy Fill” storage system, it is easy to fill the twine box. A V-shaped insert and a 30-degree tilt prevent the balls of twine from slipping when driving. The optimum position of the balls of twine means the knots are tied quickly. A mesh screen, fitted in advance, prevents the twine from unravelling by itself.

Twine box with maximum capacity

During the season, one should only have to deal with as little maintenance work as possible. With 30 balls of twine on board, it is possible to continue baling on long days without stops. When the twine runs out, suitable twine can be delivered through AGCOParts at short notice.

The next step to your Fendt square balers