360-icon download left-arrow left-doublearrow nav-dot pdf-icon rss-icon search-icon spot-icon subnavi-icon close-icon info-icon

Perfectly equipped.

The ideal line when grubbing, pass-to-pass accuracy when sowing, the perfect cut when mowing – with the Fendt 700 Vario, your work nears perfection and you will be highly satisfied with the results. The numerous interfaces and automated functions offer you maximum ver- satility for mounting implements. Powerful hydraulics facilitate and expand the areas of application for maximum efficiency and the best productivity.

A robust cast half frame, which enables a permissible gross weight of 14 tonnes, carries the load on the Fendt 700 Vario. With a high payload of 6,020 kg, the compact high-horsepower tractor has plenty of reserves for heavy implements.

Powerful hydraulics

With a delivery capacity of 193 litres per minute, the load-sensing pump on the Fendt 700 Vario provides high volume capacity for the hydraulics. These pumps for the Profi and ProfiPlus variants have an easy time with the most demanding implement operations. Additional pumps with a delivery capacity of 152 l/min and 109 l/min (Power) perform strongly with all implements. These pump capacities permit the engine speed to be kept low, which saves fuel effectively, even during demanding operations.

Weight lifter in best form

Thanks to its stable design, the Fendt 700 Vario has a lift capacity of 10360 daN and can manage the heaviest loads. With this easy-use front hitch with load relief control, you can transfer some of the implement weight to the front axle. Fine-tune the degree of load relief with a special double-acting front power lift valve. This ensures both the safe steering of the tractor and that the front-mounted implement only applies the pressure it needs for the work it is doing.

The load relief control for the front linkage is a particular advantage when operating a snow plough or a front mower in grassland operations, since implement guidance can be quickly adjusted to uneven surfaces.

The linkage is set via the Varioterminal and actuated with the power lift control module, multi-function joystick or the external controls on the rear mudguard or in the front.

Interfaces at the front

  • Top link
  • Two double-acting control valve
  • Unpressurised return front
  • 7-pin socket
  • Front PTO (1000 rpm)
  • shut-off valve
  • Lower link catch hook
  • Fold-up lower links
  • Electrohydraulic front linkage incl. shock load stabilising

Interfaces at the rear

  • ISOBUS connection
  • Hydraulic top link
  • Five double-acting control valves
  • Unpressurised return flow
  • Air brake
  • Pressure and control line power beyond
  • Hydraulic trailer brake
  • 7-pin socket
  • Lower link hook end
  • ABS socket
  • Rear PTO (540 / 540E /1000 / 1000E)
  • Hitch
  • Bottom hitch
  • Steering axle automatic

Power beyond pressure and control line for efficient drive and control of the implement.

  • Mosaic

    Power beyond pressure and control line for efficient drive and control of the implement.

  • Mosaic

    The hydraulic connections on the Fendt 700 Vario can always be coupled under pressure (CUP). The double-sided CUP (couple-under-pressure) couplings make mounting and removing the implements much easier.

  • Mosaic

    Rear PTO with 540, 540E, 1000 and 1000E rpm speeds The external PTO actuation at the rear is especially convenient.

  • Mosaic

    The self-closing valve flaps offer secure protection against contamination through dirt or water.

  • Mosaic

    ISOBUS socket for connecting implement control.

  • Mosaic

    Using the double-sided fender controls, you can actuate the PTO shaft in the tractor boot, the rear hitch and a control unit of your choice.