360-icon download left-arrow left-doublearrow nav-dot pdf-icon rss-icon search-icon spot-icon subnavi-icon close-icon info-icon

Well-thought out through and through: The Fendt operating concept

The design of Fendt control elements on the right armrest – including the Varioterminal, multi-function joystick, crossgate lever, linear modules and membrane keypad – has been tried and tested over many years. To control the function of the tractor, implement and VariotronicTI, the Fendt 700 Vario comes with two terminal versions – the 7" and the larger 10.4". Both terminals are touch and key-controlled.


On the ideal track: Fendt VarioGuide

The VarioGuide steering system ensures optimum work results and maximum comfort. We offer two different receiver systems– NovAtel® or Trimble®. With the NovAtel receiver, the correction signals SBAS, TerraStar-L & C and RTK keep you on track. Choose a Trimble® receiver to use SBAS, RangePoint™ RTX™, CenterPoint RTX™ and RTK. If you lose your RTK signal due to the terrain, VarioGuide continues to work reliably up to 20 minutes thanks to the Trimble®-xFill™ or NovAtel® RTK Assist solution.

With Fendt VarioGuide you can keep on track within two accuracy levels with a deviation of +/-20 cm (VarioGuide Standard) and +/-2 cm (VarioGuide RTK). You can use a receiver and correction service of your choice.

Headland Management VariotronicTI

The headland management VariotronicTI saves the procedures at the headlands. Up to 5 triggers, 13 saveable functions (incl. guidance) as well as simple operation when stationary, ensure constant, superior working quality at the headlands. You can trigger the sequences with the push of a button on the joystick. You save up to 1,920 hand movements in 160 turns. The variant VariotronicTI automatic is even easier to use, because it triggers the sequences automatically and exactly at the right position. It can also be programmed when stationary.

No overlapping from the very beginning with SectionControl

With the fully automatic Fendt SectionControl for ISOBUS implements, you can apply seeds, fertiliser or pesticides without overlapping. This prevents double treatment and distances are automatically maintained. With the aid of the SectionControl assistant, you can set the correction values for your implement, quickly and easily. The switch on and off points can be set precisely from the very beginning, which automatically results in economical application.

The SectionControl Assistant guides you step by step through all the required input to set the ideal on and off switching points.

When operating ISOBUS-capable sprayers, fertiliser spreaders or seed drills, SectionControl can now switch up to 36 sections.

The use of cameras on your machines significantly increases comfort and safety. You can see more of what is happening around you, especially when working with large implements. The big 10.4'' Varioterminal has up to two camera ports.

Perfect for all operations, essential in the fleet: Documentation and Telemetry.

Your work at a glance with Fendt VarioDoc

Documentation is the most important basis for farm management for agricultural businesses. With VarioDoc, relevant data can be recorded with a minimum of effort, documented in the field record and then analysed, all in the shortest amount of time. The data is transferred wirelessly from the Varioterminal to the field database using the ISOBUS standard TC-BAS. Data on the quantity of seeds and fertiliser applied or the fuel consumption per hectare is available immediately after the work is done. Additionally, jobs can be created in the PC an sent to the terminal.

VarioDoc & VarioDoc Pro

Data monitoring in real-time: Fendt VarioDoc Pro

VarioDoc Pro also permits recording of GPS position data and data transfer in near real-time. Automatic, seamless exchange with ISOXML-compatible field management software and mapping in real-time is therefore possible. The data for the operating inputs that have been used are transferred according to the TC-Geo standard and can be viewed in the Varioterminal while working.

Variable application with VariableRateControl (VRC)

Data transfer with VarioDoc Pro now permits variable rate application, based on the needs of the soil or plants, and therefore saves operating inputs. Based on VarioDoc Pro for documentation, a new solution for precision farming, variable rate control function (VRC), is now available. The individual requirements for seeds, fertiliser and pesticides are shown on application maps. They are then called up during operation and automatically executed. The big advantage: operating inputs can be defined and planned in the field database and then applied with utmost precision.


The field settings can be transferred to other Fendt tractors using the USB port. Additionally, the port can also be used to charge mobile phones.

  • Mosaic

    VarioDoc enables wireless data transfer from the Varioterminal to the field database. VarioDoc Pro continually records position and machine data and data transfer is possible via mobile network.

  • Mosaic

    The ISOBUS implement control is perfectly integrated in the Varioterminal 7-B and Varioterminal 10.4-B (not on Power version). The implement is controlled with the terminal and joystick, an additional terminal is not required.

  • Mosaic

    The field settings can be transferred to other Fendt tractors using the USB port. Additionally, the port can also be used to charge mobile phones.

Efficient from tractor up to data management

Those who invest in a tractor, also invest in the future. As soon as you get your machines well connected, you will optimise the capacity of your fleet. The newest interfaces and software solutions already permit machine data to be called up independent of location today, which enables immediate reaction. This increases the response and operating times of your entire fleet at the push of a button. The new AGCO Connectivity Module (ACM) is the interface between your tractor and the office, taking over the entire telemetry of the data transfer as the central transmission unit on the tractor.