The Slicer mower combinations with centre suspension produce the right number of strokes with high forage quality on the largest areas and under the toughest continuous loads. In the tight harvesting windows, aspects of work efficiency, reliability and comfort that save time and resources are equally crucial. Because good fodder must also be harvested economically.
Fendt Slicer Mower combinations
Fendt Slicer mower combinations - No field is too far!
Butterflies without ISOBUS - Lightweight with a big punch
The new Slicer 860/960 mower combinations are among the lightest in their class. The compact and light-weight butterfly mowers combine profitable work and innovation with proven features such as the powerful TurboLift relief technology. The imaginative design concept, innovative cutter bar technology and numerous comfort details underline the user-friendliness and performance of this mower range.
Butterflies without ISOBUS - Lightweight with a big punch
The new Slicer 860/960 mower combinations are among the lightest in their class. The compact and light-weight butterfly mowers combine profitable work and innovation with proven features such as the powerful TurboLift relief technology. The imaginative design concept, innovative cutter bar technology and numerous comfort details underline the user-friendliness and performance of this mower range.
Working width | Number Cutting discs | |
| Slicer 860 | 8,30 / 8,60 m | 2 x 6 |
| Slicer 860 KC | 8,30 / 8,60 m | 2 x 6 |
| Slicer 860 RC | 8,30 / 8,60 m | 2 x 6 |
| Slicer 960 | 9,30 / 9,60 m | 2 x 7 |
| Slicer 991 TLKC | 9,30 m | 2 x 7 |
Show more details
Full drive
The Slicer mower combinations are equipped with the flat and robustly constructed spur gear cutter bar. In good conditions, the PTO speed from the tractor can be reduced to 850 rpm for fuel-efficient and clean mowing. Die Slicer Mähkombinationen sind mit dem flachen und robust konstruierten Stirnradmähbalken ausgestattet. Bei guten Bedingungen kann die Zapfwellendrehzahl vom Traktor auf 850 U/min reduziert und so kraftstoffsparend und sauber gemäht werden.
Uncluttered
The mower combination is safely suspended and parked in the folded position - this saves space! Three stable supports ensure a firm stand. A push button on the TurboLift valve block allows you to completely depressurise the system to uncouple the mower unit. When attaching, the system restores the preselected pressure. Connections and PTO shaft are neatly stowed in the hose stow and holder.
DuoDrive for roller conditioners
The direct drive for both conditioner rollers is available as an option. In challenging harvesting conditions with large and heavy forage crops, it ensures improved crop flow and an optimal conditioning result. The drive is directly via the gearbox, the synchronous drive of the upper roller with highest efficiency via gear wheels and universal joints. The suspension relief safety protects against damage caused by foreign bodies.
Easy to maintain
The hinged guards with tool-free central locking provide plenty of space for maintenance and cleaning work. Tools and blades are conveniently stowed under the bonnet.
Adaptable
Each mower unit has a simple working width adjustment of 15 centimetres by means of a pin. This enables adaptation to the respective working widths of the front mowers which helps with an optimum overcut. The PTO shaft does not have to be shortened for adjustment
Energetic when it matters
The newly developed, mechanical "EasySwing" collision protection system ensures safety in the fields and reliably protects the machines from damage caused by obstacles being hit. The mower folds away backwards and upwards on impact. Due to its own weight, it then folds back again independently.
Floating cut
The TurboLift cutter bar relief system ensures the continuous ideal ground pressure during mowing.
- Improved cutting quality in hollows and depressions
- Reduced forage contamination
- Reduction of the fuel requirement
- Improved cutting quality in hollows and depressions
- Reduced forage contamination
- Reduction of the fuel requirement
Top form
The specially shaped extension arms of these Slicer mowers offer advantages in terms of freedom of movement and safety.
The low pivot points of the lifting arms result in a low centre of gravity for the mower and thus ensure greater transport safety. Despite a working width of 9.60 m, the mower units remain below the legally permissible transport height of 4.00 metres.
The curved-form boom arm enables a pendulum travel of +30° to -19° and effects the compensation of unevenness and height differences. The integrated compensation cylinder prevents rocking on the headland.
The curved design of the support arms ensures a very compact mounting of the mower on the tractor. A centre of gravity close to the tractor improves tracking and reduces the load on the tractor and machine.
Ultimate performance and comfort are here to stay.
Quality on the conveyor belt
For the conveyor belts with BeMove function, the swath width is infinitely adjustable from 1.8 m to 3 m on the ISOBUS terminal. So you can adjust the swath width perfectly for the next implement. The drive has its own oil supply for which no separate oil cooler is needed thanks to the smart design. It's easy to adjust the belt speed in the ISOBUS terminal, which then shows the belt hours separately. The Fendt Slicer ISOBUS mower combination also works at high speeds and safely processes harvest volumes without causing blockages.
Power at the touch of a button
The comprehensive ISOBUS control on the Fendt Slicer mower combination is a great way to control all the mower functions – all at the touch of a button in the Varioterminal or compatible ISOBUS terminals. The functions can even be operated from the joystick of your Fendt Vario tractor. All so simple – activate the auto-fold, control the cutterbed's active field pressure control at the touch of a button, and show an overview of the mower's usage in the display. The operator is warned directly in the event of overload. The ISOBUS control offers you the ultimate in adjustment and operating comfort.
Unbeatable in combination
Our ISOBUS mower combination, Slicer TLKCB, is the best machine for large farms and contractors. Unique details and smart solutions like the compact angle drive, TurboLift cutterbed relief, SafetySwing impact guard, and BeMove belt adjustment make the Fendt Slicer an efficient, durable mower for maximum area coverage, and with ISOBUS control as standard, it could not be easier to use.
Working width | Number Cutting discs | |
| Slicer 9314 TLKCB | 9,30 m | 2 x 7 |