360-icon download left-arrow left-doublearrow nav-dot pdf-icon rss-icon search-icon spot-icon subnavi-icon close-icon info-icon

You too could have perfect forage quality right now!

The headstock on the front-mounted Fendt Cutter FZ comes to the fore in difficult terrain. Regardless of how rough the terrain, the result is always a perfect cut, as a heavy weight is never applied to the ground. The pivot at the front allows the mower unit to be adjusted to match the undulating terrain in all directions.

Thanks to its three-dimensional ground following, the Cutter FZ front mower always hugs the ground, even at high speeds. This is all thanks to the oscillating and spring suspension, which allows a swing of 25°.


Cutter 310 FZ
Working width3,06 m

Number of cutting drums

4
Blades per cutting drum3





Perfect height

By turning the runner, the cutting height of the front mower can be quickly and easily infinitely adjusted within a range between 50 to 78 mm. An adjustable tool is always kept close at hand on the machine, so you can always work at the desired cutting height.

On headlands, you’ll benefit from a 360 mm ground clearance when raised, meaning that no swathes are damaged.

The Fendt Cutter FZ drum mowers with headstock adapt perfectly to the terrain with a maximum stroke of 490 mm, and are gentle on the soil with their large bearing surface.

Total flexibility with exceptionally low ground pressure.

The mowed swatch can be perfectly adjusted to the following work steps using the flexible swath width adjustment. Using a central adjustment lever on the top of the mower, you can quickly and easily adjust the swath width from 1.2 to 1.75 m depending on the model, by swivelling the two swath discs. Additional swath discs are available as an option, and form an even narrower swatch from 0.65 m to 1.4 m depending on the model.


Cutter
2940 FPV
Cutter
3140 FPV
Cutter
3340 FPV
Working width2,86 m3,06 m3,26 m
Number of cutting drums444
Blades per cutting drum
333





Mosaic

Adjustable by hand

The easy cutting height adjustment comes standard on all front mowers. On mowers with a front pendulum block, the height can be steplessly adjusted from 45–73 mm by turning the wear-resistant skid plate. A practical tool is always kept close at hand on the machine.

  • Mosaic

    Adjustable by hand

    The easy cutting height adjustment comes standard on all front mowers. On mowers with a front pendulum block, the height can be steplessly adjusted from 45–73 mm by turning the wear-resistant skid plate. A practical tool is always kept close at hand on the machine.

  • Mosaic

    Perfectly balanced

    In order to achieve perfect even on difficult terrain, the Fendt Cutter drum mowers’ swivel headstock to swing +/- 5° from side-to-side. The spring relief or the oscillating front linkage of the Fendt Vario tractors guarantees low ground pressure. Combined with the oscillating control of the Fendt Vario tractors, this gives you unparalleled ground following and sward protection. The automatic hub centring provides additional safety on the roads.

  • Mosaic

    Best access

    In order to perform maintenance, cleaning and a knife change quickly, special attention has been paid to accessibility throughout the machine. All guards open wide at the top and remain secure there thanks to the gas springs. Knives are changed in seconds using a practical special tool. The optional hydraulically opened side guards enable you to switch fields easily without having to climb out.

Experience in Hay

A century of silage expertise Tradition, innovation and passion – that’s the recipe for success of the silage centre of expertise in Feucht.