

Leading the way instead of falling behind
The Slicer family shows its most comprehensive side in the classic mower. Incisive mowing experiences begin with Fendt at a working widths of just 2.05 m and go up in true size to 4.50 m. Whether side-mounted in a modular system or centrally mounted with all the refinements of the art of mowing. Everyone will find their Slicer here.

Model overview
Working width | Number of cutting discs | |
Slicer 3160 TLX | 3,10 m | 6 |
Slicer 3160 TLXKC | 3,10 m | 6 |
Slicer 3160 TLXRC | 3,10 m | 6 |
Slicer 3670 TLX | 3,60 m | 7 |
Slicer 3670 TLXKC | 3,60 m | 7 |
Slicer 3670 TLXRC | 3,60 m | 7 |

Simply increase the power.
The new Fendt Slicer TLX series combines pioneering technology with a comprehensive safety and comfort package. Offering a wide range of model variants, theres the right machine for almost every farm. Centrally suspended and equipped with vertical X-folding and the SafetySwing Profi collision protection system, these machines are always safe in the field and on the road. A range of practical detailed solutions make harvesting work easier and offer a high level of operating comfort on the machines.

Works like a charm
The diagonal transport folding of the Slicer TLX turns the tractor and mower into one unit on the road. Depending on the operating width, the mower folds up to 120°. This gives you the best possible weight distribution, compact transport size and low transport height for safe and easy road transport. Alternatively, the Slicer TLX can also be suspended in the diagonal position and parked compactly.
Best cut in all areas
With the operating height indicator, you can set the height of the lower links when mowing with the Fendt Slicer TLX from the comfort of your cab. On headlands, the mower is simply raised and lowered by a single-acting control unit. The wide swing range of +28° to -18° provides for an exceptional cut even on slopes and embankments.

Model overview
Working width | Number of cutting discs | |
Slicer 4080 TL | 4,00 m | 8 |
Slicer 4590 TL | 4,50 m | 9 |

Model overview
Working width | Number of cutting discs | |
Slicer 270 P | 2,55 m | 5 |
Slicer 320 P | 3,00 m | 6 |
Slicer 350 P | 3,50 m | 7 |

DriveGuard
The Fendt DriveGUARD overload protection system on the compact angle drive reliably protects the mower and transmission from damage caused by foreign objects in the crop flow. The overload disc is connected to the drive train and the mower disc. If a single mower disc is blocked, the DriveGuard disc shears off at six predetermined breaking points and interrupts the drive train.

Model overview
Working Width | Number of cutting discs | |
Slicer 2460 ISL | 2,42 m | 6 |
Slicer 2870 ISL | 2,82 m | 7 |

The perfect lift
The Fendt Slicer with side hitch and spur gear drive stands out from the crowd thanks to its exceptional user friendliness. Only one hydraulic cylinder is needed for lifting on headlands. The rear power lift does not have to be engaged for lifting. The cutterbed always lifts parallel to the ground surface. You can also switch easily between working mode and transport mode by actuating a hydraulic valve. You can also benefit from the compact transport position and the centre of gravity which is close to the tractor. This ensures safety and stability on the roads.

Maximum lifetime and stability
Fendt Slicers in the ISL series have no inner shoe and have been specially designed for particularly difficult terrain. Especially on extreme slopes, mowers without an inner shoe prevent the forage from being pushed up. This ensures optimum forage flow and a clean cutting pattern even under extreme harvesting conditions.