

Model overview
Working width | Number of cutting discs | |
Fendt Slicer 210 FKS | 2.05 m | 4 |
Fendt Slicer 260 FK | 2.50 m | 4 |
Fendt Slicer 260 FP | 2.50 m | 4 |
Fendt Slicer 260 FPS | 2.50 m | 4 |
Fendt Slicer 310 FPK | 3.00 m | 6 |
Fendt Slicer Alpine mowers in detail
Cut
better
on a slope.

All-round mower at full speed
Fendt Slicer 260 FP + 260 FPK
The Fendt Slicer 260 FP and Slicer 260 FPS mowers with a working width of 2.50 m are characterised by their flexible oscillating linkage, which offers a high degree of adaptability to coupled ground conditions, whether in contour or fall line. With a oscillation path of +/- 4.5°, the mowers follow the ground contour effortlessly, ensuring a uniform cutting height and protection of the sward. The special design enables particularly compact mounting, which emphasises the flexibility of these mowers when used with manoeuvrable mountain tractors as well as lightweight standard tractors. The cutting unit is suspended at the centre of gravity and is evenly loaded across the entire working width thanks to the spring relief on the tractor side. The robust spring centring prevents bouncing when raising at the headland on slopes and during transport. The foldable side guard and the compact transport dimensions of just 2.50 m outside width ensure a high level of safety when travelling on the road.

Slope mowing at three metres
The Fendt Slicer 310 FPK
With a working width of 3.00 m, the Fendt Slicer 310 FPK is ideal for efficient use in mountainous regions. Thanks to the oscillation path of +/- 6.5°, the mower adapts perfectly to the ground contours, resulting in a uniform cutting height and protection of the sward. In addition, the driveGUARD overload protection offers outstanding protection against damage caused by overloading, which significantly increases the durability and reliability of the mower.

Precise lateral displacement for perfect cutting results
Fendt Slicer 210 FKS and 260 FPS
The Alpine S models are equipped with a lateral displacement of the mower unit, which makes slope mowing even more efficient. Drifting can be counteracted and streaking avoided, especially when mowing in contour lines. The lateral displacement also optimises the overlap when cornering. The lateral displacement can be mechanical or hydraulic and is steplessly adjustable. With the Slicer 260 FPS, the displacement is 42 cm in total (+/- 21 cm to the left and right), while with the Slicer 210 FKS it is 24 cm in total (+/- 12 cm to the left and right).