Our L-Series combines can be equipped with either a FreeFlow or PowerFlow table. Both tables feature a very rugged construction and enable optimum crop feed. The automatic cutting height control and AutoLevel table control reduce the workload, especially when working with large cutting widths. You achieve excellent results, even under difficult harvesting conditions.
Clean work
The FreeFlow table
Our FreeFlow table is available in working widths from 4.80 m to 7.60 m. It is especially stable and maintenance-friendly because the components are bolted on. With 1,254 cuts per minute, the high speed of the cutterbar ensures a clean cut with a low power requirement. The intake auger, with a diameter of 610 mm, moves the crop swiftly and uniformly to the crop elevator – ideal conditions for maximum area coverage and the best harvesting results.
Multi-coupler
The standard multi-coupler permits fast turnarounds when changing fields.
Multi-coupler
The standard multi-coupler permits fast turnarounds when changing fields.
Knife system
The Schuhmacher knife system is the best in the industry. With 1254 cuts per minute, it is self-cleaning and always remains sharp.
Power Feed Roller
The PowerFeed roller guides the crop very uniformly from the table into the crop elevator.
The PowerFlow table
Our PowerFlow table has been known for exceptional productivity for more than 35 years. The big clearance between the cutterbar and the auger facilitates cutting high crops. The PowerFlow belts then transport the crop directly under the auger. This guarantees uniform, heads-first feed for all types of crops and therefore also the best threshing performance as well as an extremely efficient throughput.
Rape auger
The optional rape auger increases the crop flow to the crop elevator in high crops and enables an increased throughput rate.
Rape auger
The optional rape auger increases the crop flow to the crop elevator in high crops and enables an increased throughput rate.
Cutterbar
The PowerFlow table performs wonderfully thanks to active crop flow from the knives to the auger.
Table control
The standard AutoLevel table control ensures a constant cutting height over the entire width.
Ingenious automatic-table control
Concentrate on driving. The Fendt 5225 E takes care of the perfect cut. The TerraControl automatic table control works in two different ranges. In the first range, skids regulate the cutting height from 50 mm to 180 mm. The second cutting height range (100 mm to 500 mm) is controlled by a sensor on the crop elevator. The optional AutoLevel table control automatically compensates for uneven ground of up to eight percent.
Fendt CornFlowTM maize headers are perfectly tailored to Fendt combine models, and harvest grain maize extremely efficiently without losses. Fendt CornFlowTM headers feature excellent accessibility to all relevant points, and make cleaning and maintenance easier for lengthy harvest periods. As a genuine Fendt product, the CornFlowTM headers also enjoy the familiar, extensive Fendt service and warranty terms.
High performance, compact size
Fendt CornFlowTM headers are available with either six or eight rows. The row spacing is either 70 or 75 cm. These maize headers are rigid or folding, and even the eight-row model remains within the 3.5 m transport width when folded as the special folding mechanism folds the header very compactly both vertically and horizontally. The operator therefore has excellent visibility to the front. All functions are conveniently operated with the multifunction lever.
High performance, compact size
Fendt CornFlowTM headers are available with either six or eight rows. The row spacing is either 70 or 75 cm. These maize headers are rigid or folding, and even the eight-row model remains within the 3.5 m transport width when folded as the special folding mechanism folds the header very compactly both vertically and horizontally. The operator therefore has excellent visibility to the front. All functions are conveniently operated with the multifunction lever.
Variable settings
The counter-rotating header rollers, each with four knife blades, are robust and durable. The deck plates can be adjusted on both sides so that the crop always flows centrally through the picking unit. This guarantees a reliable intake.
Optimum accessibility, better protection
To further protect the maize cobs, and therefore achieve perfect grain quality, the hoods and points are manufactured from flexible plastic. They fold easily, allowing rapid access to the picking rollers. They are also fitted with replaceable wear plates in the areas which experience the highest loads. The side augers on the CornFlowTM are part of the standard specification and their speed can be adjusted with ease using the Fendt multifunction lever. The horizontal chopper, which is fitted with two chopper blades, is optional and can be added or removed as required.
The next step to your Fendt L-Series
Fendt L-Series
Information material
