The right choice, for the crop.

Fendt owners have the choice

Uniform crop feed is crucial for a high output and good threshing results. That is just what the FreeFlow and PowerFlow tables offer.

Intelligent table guidance

Automatic functions such as the AutoLevel table control, automatic cutting height control, field pressure control or automatic lowering control can be operated directly from the driver seat. You can check or change various parameters in the Varioterminal 10.4” according to need. The high degree of operating comfort makes work easier and ensures fatigue-free working. It guarantees optimum table guidance, even with the wide tables.

The FreeFlow table

Our FreeFlow table is available in working widths from 4.80 m to 7.60 m. It is especially stable and maintenance-friendly because the components are bolted on. With 1,254 cuts per minute, the high speed of the cutterbar ensures a clean cut with a low power requirement. The intake auger, with a diameter of 610 mm, moves the crop swiftly and uniformly to the crop elevator – ideal conditions for maximum area coverage and the best harvesting results.

Multi-coupler

The standard multi-coupler allows fast turnarounds when changing fields.

Multi-coupler
The standard multi-coupler allows fast turnarounds when changing fields.
Knife system
The Schumacher knife system is the best in the industry. With 1254 cuts per minute, it is self-cleaning and always remains sharp.
Feed fingers
The FreeFlow table has feed fingers over the entire width, which increase the throughput of the intake auger and guarantee active, fast feed into the crop elevator.
Power Feed Roller
The PowerFeed roller guides the crop very uniformly from the table into the crop elevator.

The PowerFlow-table

Our PowerFlow table is known for maximum productivity. The big clearance between the cutterbar and the auger facilitates cutting high crops. The PowerFlow belts then transport the crop directly under the auger. This guarantees uniform, heads-first feed for all types of crops and therefore also the best threshing performance as well as an extremely efficient throughput.

Rape auger

The optional rape auger increases the crop flow to the crop elevator in high crops and enables an increased throughput rate.

Rape auger
The optional rape auger increases the crop flow to the crop elevator in high crops and enables an increased throughput rate.
Cutterbar
The PowerFlow table performs excellent work, especially in laid grain, thanks to active crop flow from the knives to the auger.
Table control
The standard AutoLevel table control ensures a constant cutting height over the entire width.

Grain maize perfectly under control.

Ingenious automatic-table control

Concentrate on driving. The Fendt 5225 E takes care of the perfect cut. The TerraControl automatic table control works in two different ranges. In the first range, skids regulate the cutting height from 50 mm to 180 mm. The second cutting height range (100 mm to 500 mm) is controlled by a sensor on the crop elevator. The optional AutoLevel table control automatically compensates for uneven ground of up to eight percent.

Fendt CornFlow^TM maize headers are perfectly tailored to Fendt combine models, and harvest grain maize extremely efficiently without losses. Fendt CornFlow^TMheaders feature excellent accessibility to all relevant points, and make cleaning and maintenance easier for lengthy harvest periods. As a genuine Fendt product, the CornFlow^TM headers also enjoy the familiar, extensive Fendt service and warranty terms.

High performance, compact size

Fendt CornFlow^TMheaders are available with six or eight rows. The row spacing is either 70 or 75 cm. These maize headers are rigid or folding, and even the eight-row model remains within the 3.5 m transport width when folded as the special folding mechanism folds the header very compactly both vertically and horizontally. The operator therefore has excellent visibility to the front. All functions are conveniently operated with the multifunction lever.

High performance, compact size
Fendt CornFlow^TMheaders are available with six or eight rows. The row spacing is either 70 or 75 cm. These maize headers are rigid or folding, and even the eight-row model remains within the 3.5 m transport width when folded as the special folding mechanism folds the header very compactly both vertically and horizontally. The operator therefore has excellent visibility to the front. All functions are conveniently operated with the multifunction lever.
Variable settings
The counter-rotating header rollers, each with four knife blades, are robust and durable. The deck plates can be adjusted on both sides so that the crop always flows centrally through the picking unit. This guarantees a reliable intake.
Optimum accessibility, better protection
To further protect the maize cobs, and therefore achieve perfect grain quality, the hoods and points are manufactured from flexible plastic. They fold easily, allowing rapid access to the picking rollers. They are also fitted with replaceable wear plates in the areas which experience the highest loads. The lateral bearing chains on the CornFlow^TM are part of the standard specification and their speed can be adjusted with ease using the Fendt multifunction lever. The horizontal chopper, which is fitted with two chopper blades, is optional and can be added or removed as required.